Emission behaviors from ZnO microwire pumped CsPbBr3 perovskite microwire.

Perovskite semiconductor materials have attracted significant attention in the fields of photovoltaics and luminescence due to their excellent photoelectric properties, such as high carrier mobility, high absorption coefficient, and high fluorescence quantum yield. In particular, low-dimensional metal-halide perovskite microcrystalline materials have been reported to exhibit low-dimensional lasing phenomena and laser devices due to their high gain and widely tunable bandgap. In this Letter, one-dimensional (1-D) ZnO microwires with their ultraviolet lasing emissions are utilized as an excitation source to pump CsPbBr3 microwire on hybrid ZnO-CsPbBr3 microscale structures. At higher excitation, the amplified spontaneous emission (ASE) behaviors from CsPbBr3 microwire are realized with ultralow threshold by indirect pumping from the ZnO lasing emission for the first time, to the best of our knowledge. In comparison, the ASE behaviors from the CsPbBr3 microwire directly pumped by Nd:YAG Q-switched laser and continuous wave laser are also performed at room temperature. There are also no multimode lasing behaviors observed. The paper provides a new method to achieve a low threshold on-chip microlaser by a high-quality perovskite micro-nano structure.

The Control of the Expansion or Compression of Colloidal Crystals Lattice with Salt Solution.

Tuning the lattice spacing or stop bands holds great significance in the design and application of materials with colloidal crystals. Typically, particle surface modifications or the application of external physical fields are needed. In this study, we demonstrated the ability to expand or compress the lattice of colloidal crystals simply by utilizing a salt solution, without the need for any special treatments to the colloidal particles. We found that by only considering the diffusiophoresis effect we cannot explain the reversion of lattice expansion to lattice compression with the increase in the salt concentration and that the diffusioosmotic flow originating from the container wall must be taken into account. Further analysis revealed that variations in the salt concentration altered the relative amplitudes between diffusiophoresis and diffusioosmosis through changing the zeta potentials of the particles and the wall, and the competition between the particle diffusiophoresis and wall diffusioosmosis lay at the center of the underlying mechanism.

Template-induced crystallization of charged colloids: a molecular dynamics study.

By using a large enough number of particles and implementing a parallel algorithm on the CUDA platform, we have performed brute-force molecular dynamics simulations to study the template-induced heterogeneous crystallization in charged colloids. Six kinds of templates, whose patterns include the planes of fcc(100), fcc(110), fcc(111), bcc(100), bcc(110) and bcc(111), have been implanted into the middle of the simulation box. Except the fcc(111) template, whose structure benefits not only fcc but also hcp crystals resulting in a similar behavior to homogeneous crystallization, bcc-type templates favor the formation of bcc crystals and bcc-like precursors while fcc-type templates favor the formation of fcc crystals and fcc-like precursors. Therefore, for fcc(100) and fcc(110) templates, heterogeneous crystallization will definitely result in a fcc crystallite. However, the results of heterogeneous crystallization that are induced by bcc-type templates are subtly different at different state points. At the state points where the interaction strength of charged colloids is weak and the fcc phase is thermodynamically stable, the bcc crystals formed with the promotion of bcc-type templates are not stable so as to tend to transform into fcc or hcp crystals. When the interaction strength of charged colloids is high, the predominant bcc crystals formed with the promotion of bcc-type templates can always persist within the time scale of simulation although not bcc but fcc crystals are thermodynamically stable.

Light Amplification in Fe-Doped CsPbBr3 Crystal Microwire Excited by Continuous-Wave Laser.

Electrically pumped halide perovskite laser diodes remain unexplored, and it is widely acknowledged that continuous-wave (CW) lasing will be a crucial step. Here, we demonstrate room-temperature amplified spontaneous emission of Fe-doped CsPbBr3 crystal microwire excited by a CW laser. Temperature-dependent photoluminescence spectra indicate that the Fe dopant forms a shallow level trap states near the band edge of the lightly doped CsPbBr3 microcrystal. Pump intensity-dependent time-resolved PL spectra show that the introduced Fe dopant level makes the electron more stable in excited states, suitable for the population inversion. The emission peak intensity of the lightly Fe-doped microwire increases nonlinearly above a threshold of 12.3 kW/cm2 under CW laser excitation, indicating a significant light amplification. Under high excitation, the uniform crystal structure and surface outcoupling in Fe-doped perovskite crystal microwires enhanced the spontaneous emission. These results reveal the considerable promise of Fe-doped perovskite crystal microwires toward low-cost, high-performance, room-temperature electrical pumping perovskite lasers.

Microfluidic Synthesis, Doping Strategy, and Optoelectronic Applications of Nanostructured Halide Perovskite Materials.

Halide perovskites are increasingly exploited as semiconducting materials in diverse optoelectronic applications, including light emitters, photodetectors, and solar cells. The halide perovskite can be easily processed in solution, making microfluidic synthesis possible. This review introduces perovskite nanostructures based on micron fluidic channels in chemical reactions. We also briefly discuss and summarize several advantages of microfluidics, recent progress of doping strategies, and optoelectronic applications of light-sensitive nanostructured perovskite materials. The perspective of microfluidic synthesis of halide perovskite on optoelectronic applications and possible challenges are presented.

Ultrafast photomechanical transduction through thermophoretic implosion.

Since the historical experiments of Crookes, the direct manipulation of matter by light has been both a challenge and a source of scientific debate. Here we show that laser illumination allows to displace a vial of nanoparticle solution over centimetre-scale distances. Cantilever-based force measurements show that the movement is due to millisecond-long force spikes, which are synchronised with a sound emission. We observe that the nanoparticles undergo negative thermophoresis, and ultrafast imaging reveals that the force spikes are followed by the explosive growth of a bubble in the solution. We propose a mechanism accounting for the propulsion based on a thermophoretic instability of the nanoparticle cloud, analogous to the Jeans's instability that occurs in gravitational systems. Our experiments demonstrate a new type of laser propulsion and a remarkably violent actuation of soft matter, reminiscent of the strategy used by certain plants to propel their spores.

One-step synthesis of nail-like Mn-doped CdS/CdBr2 hetero-nanostructures for potential lasing application.

Nanoscale heterostructures, which incorporate two or more materials such as core-shell nanocrystals, core-crown nanoplates, or seeded nanorods, allow better control of the optical, electrical and magnetic properties that are inaccessible in single component nanostructure, yet their variety and controlled growth are still challenging. Here, a nail-like Mn-doped CdS/CdBr2 hetero-nanostructure, which has a hexagonal plate on top of a nanowire, is firstly fabricated by a simple one-step thermal evaporation process. According to the characterization results, its growth mechanism could be obtained, in which the manganese bromide precursor plays a critical role in the formation of such nail morphology. The amplified spontaneous emission of the 'nanonail' is achieved at a low threshold at room temperature, which come from the local and dense exciton scattering due to their interactions excited by fs pulse. These interesting nail-like heterostructures may provide promising templates for constructing high-performance optoelectronic devices.

Template-Free Synthesis of High-Yield Fe-Doped Cesium Lead Halide Perovskite Ultralong Microwires with Enhanced Two-Photon Absorption.

Doping in perovskite is challenging and competitive due to the inherently fast growth mechanism of perovskite structure. Here, we demonstrate successful synthesis of high-yield Fe-doped cesium lead halide perovskite ultralong microwires (MWs) that have diameters up to ∼5 µm and lengths up to millimeters via an antisolvent vapor-assisted template-free method. Microstructure characterization confirms the uniformly doped Fe in the high-quality crystal perovskite MWs. Significantly, doping the Fe(III) concentration can affect both the MW morphology and photoluminescence (PL). The band edge emission of the MW at variable excitation has been accounted for by the superposition and combination of optical transitions of nearby singlet, triplet, and magnetic polaronic excitons. High-quality two-photon PL emission and the enhanced nonlinear absorption coefficient of Fe-doped MWs have been experimentally demonstrated. This superhigh nonlinear absorption coefficient and high-quality optical properties endow it with promising applications in spin-related optical switching and optical limiting devices.